Motec Wideband Air/Fuel Meter

Click HERE for the Manual

http://www.motec.com

Professional Lambda Meter

The MoTeC Professional Lambda Meter (PLM) accurately determines exhaust gas mixture strength over a wide range of engine operating conditions with a fast response time. This device has been designed to be quick and easy to use, whilst allowing a calibration engineer all of the power and configurability required for OE emissions development and certification work.

Weighing only 135 gms and with a robust aluminium enclosure it can be conveniently mounted singularly, on in multiples, in almost any application. The operating range of the device is between 0.7 and 32.0 Lambda. For Gasoline/Petrol this equates to an Air/Fuel Ratio range of 10.3:1 to 470:1.

The display may be set to show Lambda, Air Fuel Ratio or Equivalence Ratio for any sensor compatible fuel (Gasoline/Petrol, Alcohol, Gas, Diesel or "blend" fuel as defined by the user). The resolution of the display (decimal points), display update rate, display filtering, backlight intensity may all be defined by the user with the Windows setup software provided.

The MoTeC PLM provides an differential Analog Voltage Output that may be connected to an Analog Meter or other measurement instrument such as a Data Logger or Chart Recorder. The output may be defined by the user to be linear or non-linear in relation to the measured units. The PLM also supports 1mbit CAN and RS232 data links to devices such as the MoTeC Dash/Logger for transmission of sensor and diagnostic data. Comprehensive diagnostic and status channels are provided for.

The MoTeC PLM configuration determines exactly how it operates. The initial configuration will allow the MoTeC PLM to be connected to a power supply and sensor, displaying Lambda values without any modification to the configuration. Changes can be made to the configuration to alter various aspects of the MoTeC PLM. This includes the display parameter (eg. to A/F ratio), display formats, analogue output scaling, sensor type, sensor calibration, backlight intensity, etc. Standard configuration templates for most common preferences are included. The user can manually select the sensor used as Bosch LSU or NTK UEGO. Selecting "Auto" allows the MoTeC PLM to determine the type of sensor being used. The sensor can be user calibrated to compensate for sensing aging and contamination.

The two prime applications for this device are for the development and tuning of emission controlled vehicles and for use in motorsport. The highly competitive motorsport environment requires that all aspects of the vehicle are optimally calibrated and perhaps no area is more critical than the engine.

The engine will normally give best performance at only one mixture strength and the MoTeC PLM lets you accurately determine the direction and magnitude of adjustments that need to be made to achieve this. The MoTeC PLM can be used equally effectively on fuel injected and carburetted vehicles. The versatility and practicality of the MoTeC PLM makes it perfect for a wide range of applications, from garages to motorsport and OEM calibration professionals.
 

 

dsc02197.jpg (91431 bytes) dsc02198.jpg (108251 bytes)

dsc02199.jpg (99620 bytes) dsc02200.jpg (92437 bytes)

dsc02201.jpg (80494 bytes) dsc02203.jpg (139302 bytes)

dsc02208.jpg (135783 bytes)

dsc02204.jpg (153004 bytes) dsc02205.jpg (111133 bytes)

 dsc02209.jpg (167740 bytes)

 

dsc01306.jpg (132610 bytes) dsc01311.jpg (124607 bytes)

dsc01303.jpg (124920 bytes)

dsc01307.jpg (144677 bytes) dsc01308.jpg (158573 bytes)

dsc01309.jpg (148111 bytes) dsc01310.jpg (118942 bytes)