t clamp


T-Clamps


  • These clamps are under $3 each if
    ordered online and you have to commit to 5 per box, viagra
    Order at www.NapaOnline.com
    , salve These clamps are $5-4 each if ordered
    locally, you wont need to commit to 5 per box.

  • You can also order these clamps with no
    minimum from
    www.partssystems.com
    . Also under $3 each, and the selection is bigger then
    Napa.


    http://www.partssystems.com/shop/products.html?vendor_id=BREEZE

  • A number is stamped on each clamp side
    which shows the
    Minimum Clamp Diameter.

  • To find out which clamp fits best, measure
    the diameter of the rubber installed on the pipe, then look at this table, get
    the clamp that is within the range of

    Minimum Clamp Diameter &
    Maximum Clamp Diameter.


NAPA Part #

Minimum Clamp Diameter

Maximum Clamp Diameter

Hose Inside Diameter

Hose Outside Diameter

7051531
2.50 2 13/16′ 2 1/4′ 2 5/8′

7051532
2.75 3 1/16′ 2 1/2′ 2 7/8′

7051533
3.00 3 5/16′ 2 3/4′ 3 1/8′ –  3
1/4′

7051534
3.25 3 9/16′ 3′ 3 3/8′ –  3
1/2′

7051535
3.50 3 13/16″ 3 1/4′ 3 3/8′

7051537
3.75 4 1/16′ 3 1/2′ 3 7/8′ –  4′

?
4.00 4 5/16′ 3 3/4′ 4 1/8′ –  4
1/4′

7051538
4.25 4 9/16′ 4′ 4 3/8′ –  4
1/2′

?
4.50 4 13/16″ 4 1/4′ 4 5/8′

7051539
4.75 5 1/16′ 4 1/2′ 4 7/8′ –  5′

?
5.00 5 5/16′ 4 3/4′ 5 1/8′ –  5
1/4′

7051540
5.25 5
9/16
5′ 5 3/8′ – 5 1/2′

 


Parts Systems Part #

Minimum Clamp Diameter

Maximum Clamp Diameter

Hose Inside Diameter

Hose Outside Diameter

TB-250
2.50 2 13/16′ 2 1/4′ 2 5/8′

TB-275
2.75 3 1/16′ 2 1/2′ 2 7/8′

TB-300
3.00 3 5/16′ 2 3/4′ 3 1/8′ –  3
1/4′

TB-325
3.25 3 9/16′ 3′ 3 3/8′ –  3
1/2′

TB-350
3.50 3 13/16″ 3 1/4′ 3 5/8′

TB-375
3.75 4 1/16′ 3 1/2′ 3 7/8′ –  4′

TB-400
4.00 4 5/16″ 3 3/4′ 4 1/8′ –  4
1/4′

TB-425
4.25 4 9/16′ 4′ 4 3/8′ –  4
1/2′

TB-450
4.50 4 13/16″ 4
1/4′
4 5/8′

TB-475
4.75 5 1/16′ 4 1/2′ 4 7/8′ –  5′

TB-500
5.00 5 5/1″ 4 3/4′ 5 1/8′ –  5
1/4′

TB-525
5.25 5
9/16
5′ 5 3/8′ – 5 1/2′

TB-550
5.50 5-13/16 5 1/4′ 5 5/8′

TB-575
5.75 6-1/16 6 1/2′ 6 7/8′ –  7′

 

 

T-clamps for Stock Twin Turbos

NAPA Part #

Stock SMIC w/ Stock Twins

HKS TYPE-S FMIC w/ Stock Twins

HKS TYPE-R FMIC w/ Stock Twins

Blitz FMIC (big) w/ Stock Twins

Greddy 3-row w/ Stock Twins

7051531



?

x1


7051532
x9 (pipe
to pipe)
x12 (pipe
to pipe)
?
x2
x2

7051533
x1 (pipe
to TB)
x2 (pipe
to TB)

?

x1
x5

7051534

?

x8
x7

7051535
?

 


T-clamps for Single Turbo Setup

NAPA Part #

HKS TYPE-S FMIC to Single Turbo

HKS TYPE-R FMIC to Single Turbo

Blitz FMIC (big) to Single Turbo

Greddy 3-row to Single Turbo

Greddy 4-row to Single Turbo
7051531 ?
x4
? ?
7051532 x12 (pipe
to pipe)
?
x3
? ?
7051533 x2 (pipe to
TB)
?
x1
? ?
7051534 ?
x8
? ?
7051535 ?
? ?

 

These Clamp Made by,

Breeze Industrial Products
Corporation

3582 Tunnelton Road
Saltsburg, PA 15681 U.S.A.
Tel: (724) 639-3571
Fax: (724) 639-3020
E-mail:
breeze@breezeclamps.com


http://www.breezeclamps.com

For Napa/Balkamp



T-Bolt Clamps


  • Hi strength clamping.
  • Available in standard or with spring
    design for constant tension.
  • Full range of sizes and materials.

 

T-BOLT ADVANTAGES

  • 3/4″ (19 mm) wide, 100% Stainless
    Steel Band
  • High Strength, One-Piece Stainless
    Steel Trunnion
  • T-Bolts available in both carbon and
    stainless steel.
  • Superior welded construction.
  • Available in either “welded” or
    “floating-bridge” liner.
  • Available in either standard duty or
    heavy-duty spring to compensate for thermal expansion.
  • Meets or exceeds SAE Spec. J1508 for
    T-Bolt clamps.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *