emissions

 

 
Hydrocarbons

Carbon Monoxide

Nitrogen Oxides

Notes

AZ, cialis Pima County, decease Tucson
220 PPM @ idle & ~30mph %1.20 @ idle & ~30mph
not tested

CA, Sacramento, Rancho
Cordova
120 PPM @ 15mph %0.49 @ 15mph 988 PPM  @ 15mph note #1
70 PPM @ 25mph %0.46 @ 25mph 848 PPM @ 25mph

CA, Santa Clara, San Jose

100 PPM @ idle

%1.00 @ idle

no limit
note #2

130 PPM @ 2500rpm

%1.00 @ 2500rpm

no limit

CA, San Francisco

36 PPM @ idle

%1.00 @ Idle

no limit


130 PPM @ 2500rpm

%1.00 @ 2500rpm

no limit

GA, Cherokee County, Woodstock

117 PPM @ ?

0.65% @ ?

821 PPM @ ?


TX, Harris County, Houston
120 PPM @ 15mph %0.67 @ 15mph
907

PPM  @ 15mph
note #3
117 PPM @ 25mph %0.65 @ 25mph 821 PPM @ 25mph

OH, Summit County, Cuyahoga
Falls

117 PPM @ ?

0.65% @ ?

not tested


WA, King County, Bothell

  

220 PPM @ idle

%1.20 @ Idle

not tested


150 PPM @ 2500rpm

%1.00 @ 2500rpm

not tested

CO, Arapahoe County, Littleton

1.2000 GPM

20.0000 GPM

3.0000 GPM

         
         
         

PPM = Parts Per Million
GPM = Gallon
Per Minute
?

NOTE #1:

I measured:
15mph CO2% 15.3, O2% 0.2, HC 118, CO 0.22%, NO 301 ppm
25mph CO2% 15.6, O2% 0.0, HC 39, CO 0.04%, NO 23 ppm

113,145 miles
Red Line 10w-30
80/20 coolant with Water Wetter
V-160 oil
Red Line 75w-90 gear oil
stock tire sizes MXX3s at 41 psi
Nippon Denso sparkplugs installed at 63k miles
OEM air filter installed at 103k miles
Completely stock intake, cats, and exhaust, cats never replaced.
92 octane pump gas
Exhaust stem seals allowing light smoke on first start up of the day.

“lance” <jza80-alfvza@sbcglobal.net>

NOTE #2: 
Average for HC at idle is 17 and 12 at 2500rpm. I tested at 22 and 18
respectively and I am running through one of the older style Random 9000 series
converters. Average CO is 0.0 and .10. I tested at .02 and .25. I passed the
test easily.
NOX is not measured, though EGR is checked for functionality.
CO2 and O2 are listed on the report, but have no limits defined.

“Bruce” <thelonestar@yahoo.com>

Note #3: 
1)The emissions testing is done at the indicated speed on a
set of in ground dyno rollers. The RPM shown is my actual RPM (with a high
stall TC) 2) No standard has been set for CO2 emissions (yet), but it is
still measured and reported.
“John Cribb” <johnacribb@yahoo.com>
 

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *