[mkiv] bov

[Igor T.]

I've had no problem with turboimports.

Igor [94 BPU].

Dan Harris wrote:
> Thanks Lance,
>
> I will machine a 3/4 to 1" conversion fitting then.
>
> Still wondering if any one has done business with these guys yet, 
> http://turboimport.com/catalog/supra.htm, or should I go with one of 
> the other recommended suppliers for the bov?
>
> Dan
> lance wrote:
>
>> Any hose will do.  I bought heater hose.  The tricky part is the OEM 
>> connection is ~3/4",
>> not 1".  I ended up putting the 1" hose over a small section of 3/4" 
>> hose and tightening a
>> hose clamp over both.  Pretty agricultural, and not pretty on the 
>> inside, but invisible
>> from the outside.
>>
>> I've kept meaning to go turn a piece of aluminum to make a 3/4" 
>> outlet for the SSQV, but
>> never seem to find the time to get to the machine shop to do it.
>>
>> Pics of my install are here:
>>
>> http://pg.photos.yahoo.com/ph/toobull1sh/album?.dir=/a064&.src=ph&.tok=phvbqIFBZSaL4DgM 
>>
>>
>> Lance
>> '93 TT 6 Speed Coupe -----Original Message-----
>> From: mkiv-bounces at mkiv.com [mailto:mkiv-bounces at mkiv.com] On Behalf 
>> Of Dan Harris
>> Sent: Wednesday, July 05, 2006 10:53 AM
>> To: The MKIV.com National Mailing List
>> Subject: Re: [mkiv] bov
>>
>> Phil, Brian and others,
>>
>> The least expensive price I have found for the *HKS Super Sequential 
>> blow off valve kit* -
>> 1993-98 Toyota Supra turbo is $304 at 
>> http://turboimport.com/catalog/supra.htm
>> This kit and the *HKS Recirculation Fitting for 1'' ID hose (SSQV) 
>> *is all I will need or
>> will I need some 1" id hose too? If so, will any auto hose do?
>>
>> Dan
>> *
>> *Any one have dealings with these people before, recommendations?
>> Brian_Banks at Dell.com wrote:
>>
>>  
>>
>>> HKS SSBOV is fantastic and horsepowerfreaks.com has them on sale.
>>> http://www.horsepowerfreaks.com/price/Toyota/Supra_93-98/HKS/Blow_Off_V
>>> a
>>> lves/Blow_Off_Valve_Kits/part/SSQV
>>>
>>> Just make sure you get this recirculation kit for the supra to make 
>>> it easy.  Otherwise if you order just the BOV you're going to have 
>>> to order a flange and weld it onto a hardpipe somewhere (if you have 
>>> hardpipes that is).
>>>
>>> -bri 94tt BPU++
>>>
>>>
>>>
>>>
>>>   
>>
>> _______________________________________________
>> Mkiv mailing list
>> Mkiv at mkiv.com
>> http://www.mkiv.com/mailman/listinfo/mkiv
>>
>> _______________________________________________
>> Mkiv mailing list
>> Mkiv at mkiv.com
>> http://www.mkiv.com/mailman/listinfo/mkiv
>>
>>
>>  
>>
>
> _______________________________________________
> Mkiv mailing list
> Mkiv at mkiv.com
> http://www.mkiv.com/mailman/listinfo/mkiv
>
>