[mkiv] ODB1 lean spot may be cured

[Alex Gregory]

I swapped out my GCC for an SAFCII.  I am still running the AFC.  I
looked into the archives and set/wired the VPC up for hotwire.  So far
the results look promising.  I have gotten control under the 4200 mark
which I was not really able to do anything about before.  Since the
SAFC2 allows up to a -50 of leaning it out or richening it up it give
more room for adjustment.  I just started tuning on the way to work
today, so its going to take a bit of time to dial in since it takes a
bit longer with the SAFC2 than the GCC (12 points of adjustment that are
programmable rather than 5 preset points).  I will try and get some data
logs and take some screen captures and post them up.  Already I can feel
a lot more torque on the low end.  Its not easy to get somewhat of a 4th
gear pull in the bay area while going to work without putting anyone,
including myself, in danger. ;)  I will post more results later...

Thanks,

Alex G.
91' Syclone #411/2998
94' T-61 MKIV Supra
04' V70R 6-Speed
http://www.spoooln.com
http://www.forcefedfamily.com
mailto:spoooln at spoooln.com